logo

Armored Wire & Cable

CLX ARMOR, PLTC, I/S + O/S, PVC, 300V

For use in harsh environments where maximum conductor and electrostatic interference protection is required. Impervious armor prevents the entrance of water, gas and corrosive elements into the electrical core. Used for instrumentation and process and control applications in a broad range of commercial and industrial pulp and paper, mining, and petroleum applications. Approved for continuous use at 105°C in wet or dry locations, 130°C for emergency overload conditions, and 250°C for short circuit conditions. May be installed indoors or outdoors, aerially, in conduits, ducts, cable trays or direct burial in circuits not exceeding 300 volts. UL listed as, NEC Type MC per UL Standard 1569 and is approved for use in Class I, Division 2 hazardous locations. Impervious continuously welded and corrugated aluminum armor cable is recommended as an economical alternative to wire in conduit systems.

ACIC/TECK INSTRUMENTATION 18 AWG – 16 AWG

ACIC (Teck Style) is an armored instrumentation cable suitable for installation in cable trays in dry, damp and wet locations or for direct burial and may be extended through sealing glands without removal of the individual shields, when installed in Class 1, Div 2 Hazardous Locations. FT-4 Flame Rated. 105C dry, 75C wet and -40C.

Conductor: 7 Strand Tinned Copper

Insulation: PVC

Shield: Individually Shielded Pairs or Triads and an Overall Shield

Armor: Aluminum Interlocked Armor

Jacket: Inner and Outer PVC

Voltage: 600V

AIA – 10 AWG

This cable can be used in many industrial and commercial applications where high reliability and durability is required. Found in many harsh environments and recommended as an economical alternative in conduit systems. Installed in wet or dry locations as well as direct buried.

Conductor: Stranded bare copper

Insulation: Cross-linked polyethylene (XLP)

Armor: Aluminum interlocked armor (AIA). Special order for galvanized steel armor.

Jacket: PVC Jacket

Flame Test: UL 1581

AIA – 12 AWG

This cable can be used in many industrial and commercial applications where high reliability and durability is required. Found in many harsh environments and recommended as an economical alternative in conduit systems. Installed in wet or dry locations as well as direct buried.

Conductor: Stranded bare copper

Insulation: Cross-linked polyethylene (XLP)

Armor: Aluminum interlocked armor (AIA). Special order for galvanized steel armor.

Jacket: PVC Jacket

Flame Test: UL 1581

AIA – 14 AWG

This cable can be used in many industrial and commercial applications where high reliability and durability is required. Found in many harsh environments and recommended as an economical alternative in conduit systems. Installed in wet or dry locations as well as direct buried.

Conductor: Stranded bare copper

Insulation: Cross-linked polyethylene (XLP)

Armor: Aluminum interlocked armor (AIA). Special order for galvanized steel armor.

Jacket: PVC Jacket

Flame Test: UL 1581

TECK 14 AWG – 10 AWG

Teck 90 or Teck Style armored cables are used in industrial and commercial applications where the environment requires extra protection or durability. These cables can be direct buried and installed in conduit. HL (Hazardous Location) rated.  

Rated for 600/1000 volts and 90C.

Conductor: Stranded bare copper

Insulation: XLP

Armor: Aluminum interlocked armor

Jacket: Inner and Outer PVC

Flame Test: UL 1581 70,000 BTU/hour flame test

Color Code: 2 Conductor: black, white – 3 Conductor: black, red, blue – 4 Conductor: black, red, blue, white – 5 Conductor and up: black with printed numbers

TECK 8 AWG – 500 MCM

Teck 90 or Teck Style armored cables are used in industrial and commercial applications where the environment requires extra protection or durability. These cables can be direct buried and installed in conduit. HL (Hazardous Location) rated.  

Rated for 600/1000 volts and 90C.

Conductor: Stranded bare copper

Insulation: XLP

Armor: Aluminum interlocked armor

Jacket: Inner and Outer PVC

Flame Test: UL 1581 70,000 BTU/hour flame test

Color Code: 2 Conductor: black, white – 3 Conductor: black, red, blue – 4 Conductor: black, red, blue, white – 5 Conductor and up: black with printed numbers.

Looking for something?

DWC specializes in tracking down hard to find specialty wire & cable. If we don’t have what you’re looking for in-stock, we’ll get it for you!