logo

Aluminum Wire & Cable

Triplex Aluminum Conductor 600V URD

Triplex Aluminum URD has a 600 volt rating and is designed to be used in secondary distribution circuits where you are installing in ducts or in a direct burial type of application. The maximum operating temperature is 90 degrees Celsius in both wet and dry conditions.

Conductor: Aluminum

Insulation: Cross Linked Polyethylene (XLP)

Quadruplex Aluminum Conductor 600V URD

Quadruplex Aluminum URD has a 600 volt rating and is designed to be used in secondary distribution circuits where you are installing in ducts or in a direct burial type of application. The maximum operating temperature is 90 degrees Celsius in both wet and dry conditions.

Conductor: Aluminum

Insulation: Cross Linked Polyethylene (XLP)

SER Service Entrance Cable 600V

Description

Compact stranded AA-8000 series aluminum alloy conductors. Color-coded XHHW-2 insulation on individual conductors. Insulated conductors are cabled with the bare ground wire. A flame retardant fiberglass-reinforced binder tape & overall Sunlight resistant (SUN RES printing), flame retardant, gray polyvinyl chloride (PVC) material.

Phase conductors are identified by a colored stripe on the insulation – 3 conductor – Black and Black with Red Stripe – 4 conductor – Black, Black with White Stripe and Black with Red Stripe – 5 conductor – Black, Black with White Stripe, Black with Red Stripe and Black with Blue Stripe

Standards & Specifications – UL 44 for Type XHHW-2 Conductors – UL 854 – 8000 Series AL Alloy as per ASTM standards B 800, B 801 – Federal Specification A-A-59544 – Sunlight Resistant Jacket

Product details and specifications are subject to manufacturing variations and accepted industry tolerances. Please contact your DWC Account Manager with questions, or to confirm any specific product requirements.

ACSR – Aluminum Conductor, Steel Reinforced

ACSR (aluminum conductor steel-reinforced) is a preferred choice for overhead power transmission and distribution projects. ACSR is widely used due to its low cost, dependability, and strength to weight ratio. The combined light weight and high conductivity of aluminum, combined with the strength of the steel core enables higher tensions, less sag, and longer spans than any typical alternative.

AAC – ALL ALUMINUM CONDUCTOR

1272 AWG STRANDED BARE AAC ALUMINUM used for overhead transmission and primary and secondary distribution.

Looking for something?

DWC specializes in tracking down hard to find specialty wire & cable. If we don’t have what you’re looking for in-stock, we’ll get it for you!