Distributor Wire & Cable
Spec Sheet


Type: XHHW Building Wire Distributor Wire and Cable
600 Volt UL | Rated 90C
XLP VW-1 | XHHW-2
Bare Copper Conductor


DWC Part # Size AWG # of Strands Insulation Thickness In Mils O.D. Inch Weight Lbs/M
1401XHHW 14 7 30 0.14 18
1201XHHW 12 7 30 0.16 27
1001XHHW 10 7 30 0.18 40
0801XHHW 8 7 45 0.24 66
0601XHHW 6 7 45 0.28 97
0401XHHW 4 7 45 0.32 145
0201XHHW 2 7 45 0.38 225
0101XHHW 1 19 55 0.44 290
1/001XHHW 1/0 19 55 0.48 360
2/001XHHW 2/0 19 55 0.52 450
3/001XHHW 3/0 19 55 0.58 565
4/001XHHW 4/0 19 55 0.63 705
25001XHHW 250 37 65 0.7 835
35001XHHW 350 37 65 0.8 1155
50001XHHW 500 37 65 0.93 1630
75001XHHW 750 61 80 1.14 2445
100001XHHW 1000 61 80 1.29 3230

XHHW is a general purpose building wire. Approved to use in circuits not exceeding 600 volts. Highly resistant to chemicals, ozone and abrasion. VW-1 rated cables are suitable when the vertical wire flame test is required. This item is sunlight resistant. 1/0 and larger are CT (cable tray) rated.

  • Conductor: Bare copper
  • Insulation: Cross-linked polyethylene (XLP)
  • Flame Test: UL and IEEE 383 70,000 BTU/hr flame test. UL VW-1.


    Distributor Wire and Cable | Direct: 720.317.2277 | Fax: 720.317.2278 | www.distributorwire.com