Distributor Wire & Cable
Spec Sheet

Type: FREP Thermocouple Extension Wire Distributor Wire and Cable
FREP Thermocouple | EPR or XLP Insulation
Shielded | JX, KX, TX, EX | CPE Jacket
600 Volts | 90C


DWC Part # Size AWG # of Pairs Insulation Thickness In Mils Jacket Thickness In Mils Type O.D. Inch Weight Lbs/M
2004SPOSFREPEX 20 4 12 50 EX 0.42 95
2004SPOSFREPJX 20 4 12 50 JX 0.42 95
2004SPOSFREPKX 20 4 12 50 KX 0.42 95
2004SPOSFREPTX 20 4 12 50 TX 0.42 95
2008SPOSFREPEX 20 8 12 50 EX 0.53 170
2008SPOSFREPJX 20 8 12 50 JX 0.53 170
2008SPOSFREPKX 20 8 12 50 KX 0.53 170
2008SPOSFREPTX 20 8 12 50 TX 0.53 170
2012SPOSFREPEX 20 12 12 60 EX 0.67 247
2012SPOSFREPJX 20 12 12 60 JX 0.67 247
2012SPOSFREPKX 20 12 12 60 KX 0.67 247
2012SPOSFREPTX 20 12 12 60 TX 0.67 247
1601POSFREPEX 16 1 12 35 EX 0.25 51
1601POSFREPJX 16 1 12 35 JX 0.25 51
1601POSFREPKX 16 1 12 35 KX 0.25 51
1601POSFREPTX 16 1 12 35 TX 0.25 51

FREP extension grade thermocouple is used indoors and outdoors in environments where additional flame or heat protection is required to extend a thermocouple signal from a probe back to the instrument reading the signal. TC (tray cable) rated and suitable for Class 1, Div 2 HL locations.

  • Conductor: Solid conductor alloys
  • Insulation: XLP or EPR
  • Shield: Individual + Overall shield w/ drain wire
  • Jacket: Chlorinated Polyethylene (CPE)
  • Flame Test: ICEA 210,000 BTU/hour flame test/IEEE 383 70,000 BTU/hour flame test

    Distributor Wire and Cable | Direct: 720.317.2277 | Fax: 720.317.2278 | www.distributorwire.com