Distributor Wire & Cable
Spec Sheet

Type: FEP Thermocouple Extension Wire Distributor Wire and Cable
FEP Teflon | 300 Volt | 200C | Shielded
JX, KX, TX, EX | Single Pair | Tinned Copper


DWC Part # Size AWG # of Pairs Insulation Thickness In Mils Jacket Thickness In Mils Type O.D. Inch Weight Lbs/M
1601POSFEPEX 16 1 10 12 EX 0.17 32
1601POSFEPJX 16 1 10 12 JX 0.17 31
1601POSFEPKX 16 1 10 12 KX 0.17 31
1601POSFEPTX 16 1 10 12 TX 0.17 32

FEP extension grade thermocouple is used indoors and outdoors in high temperture environments (200C) to extend a thermocouple signal from a probe back to the instrument that reads the signal.

  • Conductor: Solid conductor alloys
  • Insulation: FEP Teflon
  • Shield: Overall shield w/ drain wire
  • Jacket: FEP Teflon
  • Flame Test: VW-1
  • Note: PLTC Rated

    Distributor Wire and Cable | Direct: 720.317.2277 | Fax: 720.317.2278 | www.distributorwire.com