Distributor Wire & Cable Spec Sheet

DWC Part #	Size AWG	# of Strands	Insulation Thickness In Mils	Jacket Thickness In Mils	Insulation O.D. Inch	Drain Wire AWG	Conductor O.D. Inch	O.D. Inch	Weight Lbs/M
02015KVUNISHLD	2	7	115	75	0.54	20	0.27	0.71	411
1/0015KVUNISHLD	1/0	19	115	75	0.62	20	0.34	0.79	563
2/0015KVUNISHLD	2/0	19	115	75	0.66	19	0.38	0.89	675
4/0015KVUNISHLD	4/0	19	115	80	0.76	19	0.48	0.94	961
250015KVUNISHLD	250	37	115	80	0.81	18	0.53	1.00	1122
350015KVUNISHLD	350	37	115	80	0.91	18	0.62	1.11	1476
500015KVUNISHLD	500	37	115	80	1.03	17	0.74	1.24	2015
750015KVUNISHLD	750	61	115	85	1.22	17	0.91	1.48	2893
1000015KVUNISHLD	1000	61	115	100	1.38	16	1.06	1.61	3786

5KV/8KV power cables are recommended for use as feeder circuits, distribution circuits, and for feeders or branch circuits in commercial and industrial applications. Installed in wet or dry locations or direct buried. 1/0 and larger are CT (Cable tray) rated.

Conductor: Stranded bare copper

Insulation: Ethylene propylene rubber (EPR)

Shield: Six corrugated copper shield wires longitudinally embedded in an exterior semi-conducting CPE jacket

Jacket: Chlorinated Ployethylene (CPE)

Flame Test: IEEE 383 70,000 BTU/hr flame test

---

Distributor Wire and Cable | Direct: 720.317.2277 | Fax: 720.317.2278 | www.distributorwire.com