Distributor Wire & Cable Spec Sheet

Type: 15KV Unishield Power Cable Distributor Wire and Cable
15KV Unishield Power Cable
EPR Insulation | CPE Jacket with 133% Insulation | 105C
Six Corrugated Copper Shield Wires


DWC Part # Size AWG # of Strands Insulation Thickness In Mils Jacket Thickness In Mils Insulation O.D. Inch Drain Wire Size Conductor O.D. Inch O.D. Inch Net Weight Lbs/M
020115KVUNISHLD 2 7 220 80 0.76 19 0.27 0.94 574
1/00115KVUNISHLD 1/0 19 220 80 0.83 18 0.34 1.02 753
2/00115KVUNISHLD 2/0 19 220 80 0.87 18 0.38 1.07 867
4/00115KVUNISHLD 4/0 19 220 80 0.97 18 0.48 1.17 1171
2500115KVUNISHLD 250 37 220 85 1.03 17 0.53 1.24 1349
3500115KVUNISHLD 350 37 220 85 1.12 17 0.62 1.33 1720
5000115KVUNISHLD 500 37 220 85 1.25 17 0.72 1.46 2267
7500115KVUNISHLD 750 61 220 100 1.43 16 0.91 1.67 3216
10000115KVUNISHLD 1000 61 220 115 1.59 15 1.06 1.86 4164

15KV power cables are recommended for use as feeder circuits, distribution circuits, and for feeders or branch circuits in commercial and industrial applications. Installed in wet or dry locations or direct buried. 1/0 and larger are CT (Cable tray) rated.

  • Conductor: Stranded bare copper
  • Insulation: Ethylene propylene rubber (EPR)
  • Shield: Six corrugated copper shield wires longitudinally embedded in an exterior semi-conducting CPE jacket
  • Jacket: Chlorinated Ployethylene (CPE)
  • Flame Test: IEEE 383 70,000 BTU/hr flame test/IEEE1202 70,000 BTU/hr CSA FT4 flame test/ICEA T-29-520 210,000 BTU/hr flame test

    Distributor Wire and Cable | Direct: 720.317.2277 | Fax: 720.317.2278 | www.distributorwire.com